Wiring A Timer To Your WHF

NOTE: The following instructions do not apply to the Kohilo 1.5 or 2.8

NOTE: The following instructions do not apply to units newer than July of 2013. Please call for compatibility

We often get asked how to use a timer with our whole house fans. The short answer is to purchase the optional wireless remote which has a built in timer. But for people who prefer a wall switch there is a solution for you. You can wire a mechanical turn dial timer to operate your WHF. We recommend a mechanical timer because most digital timers require 110v. Our controls are 24v and hooking up 110v would damage the AirScape control board. We also want the process to be a manual one so that you remember to open a window. The following shows two ways to wire a timer with your AirScape WHF:

OPTION 1: TIMER AND AIRSCAPE WALL SWITCH

OPERATION:

ON – Wall switch in on position, turn timer to desired time, chose fan speed

OFF – Switch wall switch to OFF or timer expires

timer_option1_1

OPTION 2: TIMER AND CUSTOMER SUPPLIED SINGLE POLE SWITCH

OPERATION:

ON – Turn timer to desired time, choose fan speed

OFF – Timer expires

timer_option2_2