This is a brief reminder of the proper location for wiring the wall switch to your AirScape control board. We have noticed that sometimes people, even licensed electricians, wire the wall switch to the auxiliary actuator terminal (red crossed out circle). Wiring at this incorrect location will blow the 3 amp circuit breaker on your unit and possibly damage your control board. Regardless of your experience level we recommend looking at the wiring diagram in the instruction manual before wiring the wall switch. The correct wiring location is indicated by the green circle with check mark.
Related Posts: HOW TO WIRE THE WALL SWITCH
Did you find your install particularly challenging because of your attic configuration? Did you have a unique install that went beyond the traditional install method? Or are you just proud of your DIY project? If you answered yes to any of these questions we would love to see your installation photos. Hopefully, your unique or challenging install will help someone overcome an obstacle in their installation or just show them what’s possible beyond the norm. With that being said, we are starting an ongoing blog series on unique and/or challenging installs. This series is open to both home owners and installers.
So, if you feel that your installation could be helpful, please send your photos and answers to the questions below to: experts@airscapefans.com
What was the most challenging part of the installation?
On a scale of 1 to 5 how difficult would you rate this installation? (1 easy – 5 difficult)
What advice would you give to someone doing this installation?
How much of a “Do-it-yourselfer” are you? ( 1 what’s a hammer? – 5 fix everything myself)

A special thanks to Green Meadows Building one of our Pro Installers in Ashland, OR